Ultrasonic Flaw Detector - Trusonic III

  • $4,500.00


TRU-SONIC III - DIGITAL ULTRASONIC FLAW DETECTOR

ECONOMICAL BUT INCL. ALL FUNCTIONS FOR WELDING INSPECTION

Tru-Sonic III hand held and light weight Digital Ultrasonic Flaw Detector offers you all the features of larger, heavier instruments, such as high resolution with the usual high gain reserve.

In addition to this, the instruments ease work by the inclusion of extras. For example in weld testing the exact flaw location is evaluated; all features are available for demanding thickness measurements.

User-friendly programs for display evaluation with 3 or 4 Distance Amplitude Curves (DAC)

Fast AWS mode select and inspect

Welding simulation map for welding section display defect location for report printing

The light weight 1.8 kg, including battery

The ergonomic design and operational ease will amaze you.

Large Color TFT display. A bright, 400 cd/m2 high contrast screen enables you to read your measurements data even under poor lighting conditions. The A-Scan, the instrument settings and the digital measurement readings are all displayed simultaneously.  

The instruments can withstand the toughest condition. After testing, you will certainly wish to use the many documentation possibilities to record all calibration parameters and test results. It could storage 980 data inside.

INSTRUMENT TO MEET YOUR NEEDS

The high refresh rate (60Hz) of the bright and high-contrast TFT screen is reminiscent of the successful analog tubes.

You can read your measurement readings quickly and clearly. If a measurement is made when you are at some distance from your instrument, simply display the reading in large digits.

The pulse repetition frequency can be reduced. By doing this, phantom echoes can be reliable avoided which could occur when testing larger test objects.

The instrument can store data sets, including all instrument parameters, test results and A-Scans and can be recalled at any time.

You soon feel at ease, because you operate them in accordance with your proven standards for digital instruments.


TECHNICAL SPECIFICATIONS

 

Calibration   range:

From 25 to 1000 mm (steel long)

Sound velocity:

2 fixed values (3230m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s

Probe delay:

0 to 2000 mm

Gain:

110dB, adjustable in steps of 0.1/1/2/6/12dB

Fine Gain:

0.1 dB

Frequency range:

0.5-10 MHz wide band

Pulse repetition frequency:

10-1000 Hz, depending on the set calibration range and the probe delay for adjustable

Test methods:

Pulse echo mode and Thru mode

Pulse Voltage:

300 V negative spike

Damping:

120 ohm

Echo presentation:

Full wave

Suppression:

Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display

DAC:

Recording of up to 8 reference echoes, 40dB dynamic range,

display of the DAC curve 3 or 4 DAC curve can be setting

AWS mode:         

Automatic 50% and 80% selectable and D reading

Data storage:

980 A-scan Trace Data  in the FLASH memory, with additional alphanumeric identification and directory function

Units of measure:

mm or inch

Interface:

USB

Probe connector:

Two LEMO 1 connectors (  BNC connector optional )

Power supply:

Removable 13.2Ah/ 3.7 V Li-ion Battery or mains supply via an

external mains power/charger unit JBD15-A2S

Operational period:

Up to 10 hours with Battery ( select LCD low bright )

Operating temperature:

:-5° C +65° C

Storage temperature:

-20° C +55° C (without batteries)

Display size:

110mm × 62mm (W×H)

Dimensions:

145mm × 210mm ×4 5mm (H×W×T)


We Also Recommend